Key Features :-
CAPACITY | |||||
Turning diameter, Max. | mm | 280 (11.02") | |||
Turning length, Max. | mm | 522 (20.55") | |||
Swing clearance diameter | |||||
over carriage | mm | 230 (9.01") | |||
over way covers | mm | 430 (16.93") | |||
SPINDLE | |||||
Spindle size | A2-6 | ||||
Hole diameter through spindle | mm | 62 (2.44") | |||
Front bearing bore size | mm | 95 (3.74") | |||
Rear bearing bore size | mm | 85 (3.4") | |||
CHUCK | |||||
Chuck size | mm | 200(8") | |||
Chuck package | GMT Semi-Hollow | ||||
Maximum Bar Capacity | mm | 50(1.9") | |||
TURRET | |||||
Index Mechanism | Hydraulic | ||||
No. of Tool Stations | 8 | ||||
Turning Tool Shank Size | mm | 25x25x150 (1"x1"x6") | |||
Boring Bar Dia. Max. | mm | 40(1.5") | |||
SPINDLE DRIVE | |||||
Spindle Speed range | rpm | 30-3000 | |||
Spindle Power (15mins./Cont.) | kw | 11/7.5(14hp/10hp) | |||
FEED DRIVES | |||||
Rapid Traverse (X & Z Axes) | mm/min | 40000 (1180 ipm) | |||
Programmable Travel | |||||
X-Axis | mm | 165(6.5") | |||
Z-Axis | mm | 522(20.55") | |||
Axis Thrust | |||||
X-Axis | kg | 283 | |||
Z-Axis | kg | 283 | |||
Guide Ways (X & Z Axes) | Linear Motion Guides | ||||
TAILSTOCK | |||||
Quill Diameter | mm | 80(3.2") | |||
Quill Taper Size | MT4 | ||||
Quill Thrust Max. | kg | 750(1650 lb) | |||
Quill Stroke | mm | 120(4.7") | |||
Tailstock Base Travel | mm | 339(13.35") | |||
ACCURACIES | |||||
Maximum spindle run out at nose | mm | 0.008 (0.00032")) | |||
X & Z Axes Accuracies | JIS | VDI 3441 | |||
Positioning Accuracies | mm | ±0.005 | +/-0.010 | ||
Repeatability | mm | 0.0025 | 0.005 | ||
MACHINE SIZE AND POWER | |||||
Length (without accessories) | mm | 2899 (114.20") | |||
Height | mm | 2265 (89.17") | |||
Width | mm | 1586 (62.14") | |||
Height of Spindle center | mm | 1100 (43.30") | |||
Weight | kg | 4200 (9590 lb) | |||
Power Consumption (without options) | kva | 20 | |||
CONTROL | |||||
CNC System | Fanuc | ||||
Axes Drive Package | Fanuc | ||||
Spindle Drive Package | Fanuc |