MACHINING CAPACITY | ||||
Max. bar machining diameter | mm |
100
80
93/100
|
||
Max. suggested machining diameter | mm |
552
552/450
552
|
||
Max. machining length | mm | 1195 (2) | ||
Max. swing over diameter | mm | 680/500 | ||
MAIN SPINDLE | ||||
Max. speed | rpm |
2800
3500
3000
|
||
Spindle nose | ASA |
8”
8”
8”
|
||
Spindle bore | mm |
111
91
106/111
|
||
Inside diam. of bearings | mm |
150
130
150
|
||
Chuck diameter | mm |
400
315
400
|
||
Motor power (S1-S3) | kW |
22-30
15-22
30-38
|
||
Max. torque (S1-S3) | Nm |
566-772
398-700
800-1014
|
||
TURRET | ||||
No of tools | N° | 16/12 | ||
Tool shank for OD turning | mm | 25x25 | ||
Tool shank for ID turning | mm | 32-40 / 40-50 | ||
Turret indexing (1 pos) | sec | 0,3 | ||
AXES | ||||
X-axis stroke | mm | 305 | ||
Z-axis stroke | mm | 1310 | ||
X-axis rapid traverse | m/min | 18 | ||
Z-axis rapid traverse | m/min | 24 | ||
TAILSTOCK | ||||
Automatic quill stroke | mm | 150 | ||
Quill diameter | mm | 115 | ||
Morse taper | MT | 5 | ||
Automatic Positioning | mm | 1310 | ||
B-AXIS TAILSTOCK | ||||
Morse taper | MT | 5/4 | ||
B-axis automatic positioning | mm | 1140 | ||
B-axis rapid traverse | m/min | 15 | ||
COOLING SYSTEM | ||||
Tank capacity | l | 300 | ||
Pump nominal displacement | l/min | 60 | ||
Electropump motor rating | kW | 1,1 | ||
DIMENSIONS AND WEIGHT | ||||
Machine with swarf conveyor | cm | 543x219x233h | ||
Spindle centre height | mm | 1070 | ||
Machine weight with swarf conv. | kg | 7850 |